Cutting Edge Window Tinting; How To Apply Tint Like A Pro
Window tinting is a fantastic method to improve the appearance of your vehicle and shield your interior from sun. It may be difficult to apply window tints in the event that you've never attempted it before.
However, with the right tools and directions, you can do it yourself! This article will show you how to apply window tint like an professional. We'll provide step-by step instructions and suggestions for the best results. What are you putting off to do?
What Is Window Tinting?
Window tinting is the application of a thin film on the glass of your vehicle's windows. This film can minimize reflection, block UV rays, and improve the overall appearance of your car.
There are many different types of window tints in the market, therefore it is essential to pick the one that's right for you. Once you have selected the ideal window tint then follow these guidelines to apply it with ease!
How to apply Window Tint
First: Clean the Glass Surface
The first step to a successful window tinting project is to clean the surface of the glass. This will make sure that the tint adheres well and lasts for a long time.
Use a glass cleaner and cloth that is free of lint to get rid of any dust, dirt or other debris from the glass. Be sure to wash all surfaces, including the edges and corners.
Second Step: Find the Size of the Window
Next, you need to measure the windows. This will let you know the amount of tint you'll need to purchase.
Make sure to measure the window with tape measures. The measurements can then be multiplied to determine the square footage.
For instance, if your window measures 12 inches wide and 18 inches high the total area would be 221 square inches.
Third Step: Cut the Tint Film
Now is the time to cut out the tint. The pre-cut pieces are provided in the majority of kits. However, you might have to cut the film to fit in your window.
Apply the tint film onto the glass, then apply the knife or a razor blade to take away any excess. Be sure to trim off from yourself and work slowly to avoid mistakes.
Fourth Step: Remove the Liner
After you've got the tinted film cut to size and removed, you can remove the liner. It's a plastic piece that shields the adhesive side.
Peel the film off from one corner to remove it. Make sure not to touch the sticky film with your fingers as this can leave fingerprints and lead to bubbling.
Step Five: Spray the Glass with Soap Solution
The next step is apply a spray to the glass surface using an soap solution. This will help the tint film adhere to the glass and avoid bubbles.
Make sure to cover the entire surface of the glass, then use a squeegee take away any excess solution.
Step Six: Apply the Tint Film To The Glass
The next step is to apply the tint film to the glass. Begin at the corner and gradually peel away the liner. Then, apply the sticky side to the glass.
Use a squeegee to smooth any bubbles out as you go. After the entire roll of tint film is placed, trim away excess material using a sharp blade or utility knife.
Seventh Step: Remove the outer layer of the Tint Film
Then, take off the layer of outer. It is possible to remove it from one corner, or use a razor to cut it off.
It's over! Now you're a pro at applying window tint.
Conclusion:
We'd like to end with a statement that window tinting isn't difficult If done correctly. Follow the instructions in this post on how to have perfect tinted windows.
|
Phone +18474292479
|
|
| Address |
408 Brook St, Elgin, IL 60120
|